What are the requirements for sand washing machine installation

2022-03-10

If you want the sand washing machine to work efficiently and have a long service life, it is necessary to ensure the normal operation of the sand washing machine from all aspects. Among them, the installation location of the sand washing machine is a very important link. The requirements for the installation of the sand washing machine are as follows.

Installation site

1. Power

The sand washing machine is a device that needs to be powered on, and the power of the sand washing machine is relatively large. When choosing a venue, you must consider whether there is enough stable power supply around to support high power, and keep the transmission line as short as possible. If possible, try to use mains power.

2. The water source must be sufficient

The main work of the sand washing machine is to clean the stone, so the work is inseparable from the water, so it has a great demand for water sources. When choosing the installation location, please consider the main work of the sand washing machine, and try to choose a place close to the water source.

3. Ease of transportation

Then the main job of the sand washing machine is to clean the stone, and the cleaned stone needs to be sold directly, so the transportation around the sand washing machine is also very important. Choose a site that is connected to a public road, and if using water transport, choose an existing pier or a location suitable for a pier.

4. Site security

For the sake of safety, the location where the sand washing machine is installed should have better engineering geological conditions as much as possible, avoid construction under faults, landslides, and flood levels, and avoid silt, hummus, ancient wells, or places protected by cultural relics.

Installation requirements

1. When the sand washing machine equipment is transported to the site, the user should immediately check whether the parts are complete and whether they are damaged. After confirming that the sand washing machine is intact as a whole, it can be installed.

2. After the sand washing machine is installed, first design the construction drawing of the sand washing machine, design in advance, and then install it, to prevent errors during construction and then re-construction.

3. When installing the spiral sand washing machine equipment, the inclination angle must be ensured according to the requirements of the installation drawing to prevent collapse due to excessive inclination.

4. To facilitate the tightening of the belt, the motor can be placed on the guide rail.

5. After making adjustments according to the above requirements, rotate the rotor disc several times to check for paper jams and collisions.

Sand washing machine operation precautions

1. Before using the sand washing machine, please check whether there are foreign objects in the drainage holes and sewage holes. If there are any foreign objects, they should be cleaned in time, otherwise, the sand washing machine will be damaged.

2. Carefully check whether all the fasteners are fully tightened and the nuts are tightened, especially if the new sand washing machine has just been shipped.

3. The lubricating oil must meet the standard, otherwise, it will affect the working speed of the sand washing machine.

4. Check whether the belt of the sand washing machine is in good condition. If the belt is found to be damaged, please replace the belt. If there is oil on the belt, wipe it off with a rag.

5. Check whether the protection device is in good condition. If any unsafe phenomenon is found, it should be eliminated in time.

6. When turning on the sand washing machine, be sure to listen to the sound of the sand washing machine carefully. If you find any abnormal noise, you must close it in time, check what is wrong, and don’t lose the big one because of the small.