Routine maintenance of Africa sand washing machine
Routine maintenance of Africa sand washing machine? Poor lubrication of lubricating bearings is the main reason for the failure of sand washing machines. The quality of the lubricated bearing directly affects the overall operation of the sand washing machine, so how can we do the daily maintenance of the lubricated bearing of the sand washing machine?
When many customers use sand washing machines, they often overlook a problem, which is the lubrication of the sliding bearings of African sand washing machines. The sliding bearings are the key parts that carry the normal operation of the sand washing machines. If the sliding bearing is poorly lubricated and the sealing is not strict when the sand washing machine is working, the sliding bearing will be damaged. Then it affects the working efficiency of the entire sand washing machine. Once the lubricating bearing is seriously worn, the temperature in the cavity will rise sharply, causing the lubricating bearing to burn out and the service life will be less than one year.
Before starting the Africa sand washing machine, start the oil pump first, and then start the sand washing machine after the oil pump has been running for two minutes. When the oil pump cannot continue to supply oil, the operation of the sand washing machine should be stopped immediately.
The seasonal maintenance of Africa’s sand washing machinery mainly includes the replacement of oil, fuel, and antifreeze, and measures to increase refrigeration facilities. The bearing maintenance of the sand washing machine is very important. The bearing part of the sand washing machine is easily damaged and wears greatly during use, so regular maintenance is required, and lubricating oil is added regularly to increase the bearing life. The bearing grease should be replaced every three months, and the roller bearings should be carefully cleaned with clean gasoline or kerosene.
After the African sand washing machine is ready for work, it should be operated according to the prescribed driving sequence. During normal operation, it should also be noted that the specified value should not be exceeded for a long time.